Parts - Zenith Early Eames Shell Chair 1 x Replacement Black Rubber Shock Mount
1 x Single - Early Zenith replacement rubber shockmount for an Eames arm shell chair with widemount shockmounts.
Zenith Shockmounts are larger than standard fiber chairs and are made from the original rubber compound for the most authentic replacement part.
We recommend using the epoxy glue 'original formula' by JB Weld for the best possible adherence of these mounts to fiberglass chairs. This glue is available to buy alongside our shockmounts.
1 - Clean and sand area of original shock mount in preparation. Remove all old glue/rubber
2 - Gently sand back of new shock mount to make slightly abrasive
3 - Clean back of new shock mount and area of application with acetone or white spirit.
4 - Use a base and circle the exact locations on the shell where mounts to be placed
5 - Mix and apply an epoxy glue (JB Weld is one such brand) to the shockmount
5 - Put shock mount into place and use a clamp for at least 24 hours.
More in-depth guidelines are provided with each purchase. For guidance only, we are not responsible for the quality of the work!